Showing posts with label computer aided design. Show all posts
Showing posts with label computer aided design. Show all posts

Friday, August 27, 2021

Using WeavePoint to design an amalgamation draft

 I've been fascinated with amalgamation drafts since I first read Alice Schlein's Network Drafting: An Introduction.  Recently, Alice published a new monograph  called Amalgamation: Double your Dobby and I eagerly purchased a copy directly from her.

As I read the monograph, it appeared that only some weaving software programs were capable of copying the drawdown portion of the draft and pasting it into the threading.  I use WeavePoint for most of my design work, so I went to AVL to see if the programmer of WeavePoint, Bjorn Myhre could help.   At the same time, Bob Kruger from AVL sent the question to Jannie Taylor.  Between the two responses from Bjorn and Jannie, I was able to amalgamate to my heart's content!  So - thanks to both of them for making my software just a bit more valuable to me.

The following is my process.  I've also tried it with Fiberworks for PC and it works well there too.  Choose a threading that you want to amalgamate.  You will notice that I have selected a threading that can be duplicated, in other words, I haven't ended on shaft one so that it repeats without double threads.  Alice's method is just a bit different and she does put in threadings that begin and end on the same shaft.  (More about that later).

 

The next step will be to add a satin tie up and select "tromp as writ" to fill in the treadling.  In the example below the counter is 11.  (Satin counters are explained in Alice's monograph which I recommend buying if you are interested in doing this kind of design work.)  A plus to WeavePoint software is that you select Fill from your options bar - then select satin.  This feature will give you all the counters that will work with the number of shafts in your design.  Otherwise you will need to research satins for the number of shafts you are working with.

Then, change from tie up mode to liftplan mode.  This will give you a liftplan that you can paste into your threading.  So - copy the liftplan and paste it into the threading to the left of the original 

 

 

 

 

 

 

Change back to a tie up and treadling and do another "tromp as writ". 

 
Now you are ready to get rid of the satin tie up and experiment with twill tie ups.  Check the float length when you have one that pleases you.  Sometimes it can be hard to get something that has  floats that are 5 or less in length.  WeavePoint makes searching for a tie up easy too.  In the Fill option, select twill tie ups.  You will be able to set the float length for the tie up.  I usually start with 3, sometimes need to go down to 2 in order to find a tie up that won't result in too long floats in the drawdown.
 
 


You can use the draft as is now, or do another little fiddle bit.  I often copy the entire threading and then use "paste special" which is found in the Edit menu.  Click on "flip vertical" and then paste that threading to the left of the original threading.  This option gives you more designs.
 

 
The final bit of information that I gleaned while working with Alice's monograph and my WeavePoint design solution is that when you copy the original liftplan with the amalgamation in it, you can paste it into the threading by doing  a vertical flip (again use paste special in the Edit menu)  This allows you to start and end on the same shaft with your original threading.
 
3/18/23  This is a postscript to this post.  I recently found that Handweaving.net has a feature that automatically will make a series of amalgamation drafts online.  Watch the tutorial https://www.youtube.com/watch?v=P4cysOpJSKk   and see what you think.  You can always upload one of your own drafts to the site and manipulate it online as well.  Amazing tools that make our weaving design life so much better.
 
 


Thursday, September 15, 2011

A wonderful draft and I don't know what to call it!

This year I started out with a resolution to learn some new things and think a bit outside my comfort zone - in all things, not just weaving.  I've been weaving more than blogging, but I'm hoping that is about to change too because I've had some good adventures in trying new things.

One of the biggest hurdles for me in doing something new is that I really don't like failures anymore.  Truth is, I've never been comfortable with failures and it keeps me from taking chances.  Good trait for staying alive, but not so good if you want to gain new skills..  Over the next few months, I'll share some of my experiences.  Mostly, it's been good stuff to share and luckily I didn't take pictures of some of the more stressful moments in learning to warp with a paddle.  But, I'll write a bit about it in a later post.

One of the first things I started out with this year was making some lap robes for local seniors in a project called Holiday Cheer.  I wasn't selling much in the way of shawls - bad economy or maybe my shawls aren't as fabulous to other folks as they were to me:-)  I thought that weaving for a good cause might be the ticket to trying something new.  I read a bit about the sizes for lap robes, that they shouldn't have fringe if you were using them in a wheelchair and that they needed to be machine washable and dryable.  I settled on using up some rather thick cotton yarn I had in two colors - red and brown.  They wrapped at 20 epi.  I futzed around with this draft and that, but nothing hit my fancy.  I thought about doing them in network twills, but then remembered a recent article in Handwoven (March-April 2011) by Mary Berent.  She used turned taquete for dish towels sett at 40 epi.  I figured if I used 20 epi with my yarns, they would result in the warp face I needed for my heavier lap robes.   I didn't find the draft in Handwoven instructive enough for me to do my own design, so I went in search of other information about drafting it. What I came up with isn't turned taquete , but I stumbled across a design that worked beautifully.  I converted my design threading (in this case I used a network threading from a previous project) to a parallel threading.  The tie up for 24 shafts was a 12/12 twill.  For 8 shafts the tie up would be 4/4 twill.   Add an alternating tabby or basket tie down with an interesting treadling sequence and you have the recipe for a warp faced design with lots of drape.


I wove six lap robes using a 16/2 red cotton weft that virtually disappears.  They are about the size of beach towels and have a pleasing heft to them.  One of the wonderful things about the threading was that I could weave a double weave hem. I wove a top and bottom layer and tucked the fabric back inside itself and closed it with a blind stitch.

Having had one success led me to another project on my Baby Wolf.  Eight shafts with a point threading and treadling led to the draft shown below.


This project was outside my color comfort zone and was therefore appropriate for my year long study. 


Painted super-wash wool that I dyed a couple of years ago along with dark blue Alpaca for the warp.  The weft was 20/2 rayon in navy.  The navy weft tones down the bright colors of the super-wash wool but is still not intrusive on the overall design.

 Hey - this is a pretty neat structure. Does anyone have a name for it?

Sunday, February 20, 2011

Woven Shibori

I belong to a Complex Weavers group called CADE (Computer Aided Design Exchange). Each year, members are required to write an exchange paper about some aspect of designing handwoven cloth using the computer. Weaving drafts aren't the only way to work on design, of course, but they are the primary way in which most of us go about our weaving design work. It takes a good bit of time to put together one of these papers, so a lot of us agonize for weeks or months beforehand, trying to come up with a good subject and something original to share with the group. What follows is my submission for the current year.


My first experience with loom controlled shibori was at CNCH in 2007 in a three day, hands on class with Ellen Good. I learned the basics of adding a gathering thread at intervals throughout the plain weave pieces. We dyed our cloth, pulled up our gathering threads and painted on more dye. The results were spectacular. I decided right away that I wanted to add pattern to my ground cloth in addition to the shibori designs. The principle would be the same: several picks of a structure, a pick of shibori pulling thread and repeat.

For weft gathering threads, the method I have settled on for designing drafts and liftplans is to take an existing ground cloth draft and add a space at even intervals in the treadling sequence. Working with tie up and treadling seems the easiest way for me to manipulate the drafts. Using WeavePoint software, I am able to add blank picks (or ends) at a specified interval. Depending on what my sett and expected ppi will be, I put a blank space in the treadling sequence between four to fourteen picks apart. For the shibori part of the tie up, I add additional treadles for another tie up. (If I'm designing for a dobby loom, I can add lots of treadles for an elaborate design, but if I'm weaving on a four or eight shaft loom, six treadles is about right.)

I've designed a great many drafts using this procedure and recently found something that helps me to visualize both the ground cloth and the shibori patterning. The first part of the draft shows the ground cloth with the pulling threads in a contrasting color. Then, I drop the ground cloth picks and let the shibori pattern show on black background, with the picks in color. This allows me see the emerging pattern and gives me an inkling about what the cloth will look like after dyeing. Part of the charm of woven shibori is the element of surprise and the drafts only give you a blueprint, not a guarantee!

There is always the question of how long floats should be in your gathering threads. Long floats will create deep folds in the cloth when gathered. Therefore the resist to dye will be greater in the valleys and your patterning will be clearer. If your floats are short, the resist isn't all that effective, so the cloth will have a stippled effect. Both are interesting and good, but you do need to think about how much your ground cloth will be stressed during the gathering process. Delicate ground cloths need longer floats so that you aren't picking up just one thread in your gathers.

I started out designing drafts with dyeing in mind, but found that permanent pleating could also be achieved when using polyester and, in a happy accident, soy protein fiber. This lead me to think about collapse fabrics in which warp and weft face twills are combined so that the fabric will pleat. Erica De Ruiter wrote an article in Weaver's magazine about drafting for diagonal pleats. I decided to use her draft and add supplemental wefts to pull the pleats into place, the idea being that they could also be dyed at the same time or polyester yarns could be used in the weft to make the pleating permanent.(see references). The next step beyond this was to make my own design with a curving twill line using Photoshop® and add the pleating threads to the liftplan.


Woven shibori is an adventure in design, dyeing and creating textured surface. I have just scratched the surface of what can be done with this technique and know that I will have many hours of pleasure ahead in my design work.



References
De Ruiter, Erica. “Scarves in Diagonal Pleats.” Weaver's. Fall 1997: pg. 41.
Ellis, Catharine. Woven Shibori. Colorado: Interweave Press, 2005.
Faulkner, Kay. “Loom Controlled Shibori.” Weaver's. Summer 1998: pgs. 34-35.
Faulkner, Kay. 24 Shaft Sample Exchange, Complex Weavers. November 2004.
Good, Ellen. CNCH Class Notes for Loom Controlled Shibori. May 2007.
Hamilton, Dawn. “Catharine Ellis Muerdter's Woven Shibori.” Handwoven. Nov/Dec2000: pgs. 76-78.
Harvey-Brown, Stacey. Woven Shibori for Textural Effects. United Kingdom: The Loom Room Publications, 2010.
Muerdter, Catharine Ellis. “Woven Shibori.” Shuttle Spindle & Dyepot. Winter 1999/2000: pgs.32-35
Schlein, Alice. The Liftplan Connection: Designing for Dobby Looms With Photoshop® and Photoshop Elements®. South Carolina: Alice Schlein, 2010.
Stollnitz, Janet. “Pleats ---- at Last.” Complex Weaver's Journal (Collapse, Pleat & Bump Study Group). February 2010 pg. 30.